Brief Introduction

The installation of Z4 series dc motor electric generator conforms to the requirements of GB/T997 "Installation Types and Codes of Motor Structures". Except the axial distance (B dimension) of the foot holes, the dimensions of the motor are in compliance with IEC standard.

The position of the motor outlet box is from the drive end (non-commutator end) on the right side of the stand (the position box). If the user requires the outlet box to be placed on the other side of the stand, please noting when ordering. The basic output shaft of the motor is a single shaft extension, and the output shaft (front box) faces the exit shaft in the direction of the left shaft. The shaft extensions can also be made if required by the user. The basic direction of rotation of the shaft is viewed anti-clockwise from the commutator end. The transmission mode of the motor is the coupling of the elastic coupling, and it can also be used for the transmission mode of a certain radial force (belt or gear transmission).

According to the needs of the user, the motor can be designed to be able to attach the structural form of the techo-generator, pulse generator, centrifugal switch, and brake. The specific requirements can be negotiated with the supplier.

Main Technical Parameters

Outline Dimensions

Motor Parameters