TEL
+86 15523831294
TitleBrush DC MachinesBrief IntroductionFor this type ofbrush dc machines, if the brush height wears to the minimum limiting value, replace brushes in same mark uniformly. To keep in good contact between brush and commutator, brush grinding should be conducted. The procedures are as follows: w
Brush DC Machines
Brief Introduction
For this type of brush dc machines, if the brush height wears to the minimum limiting value, replace brushes in same mark uniformly. To keep in good contact between brush and commutator, brush grinding should be conducted. The procedures are as follows: wrap tightly the emery cloth on commutator surface and make the emery side contact with brush, rotate armature back and forth so as the column-sized emery cloth can grind the brush until the contact surface between brush and commutator larger than 75%. At last, clean and remove the carbon dust. Normal operation shall be conducted after half an hour idling running.
Frame | #92-6 |
Power Scope | 40KW |
Voltage | 110V/220V |
Exciting Mode | Shunt Exciting |
Speed | 750 rpm |
Cooling Method | IC01 |
Protection Grade | IP22 |
Insulation Class | B (120℃) |
Duty | S1, S4, S5, S6, S9 |
Mounting Type | IM V1 |
Tel: +86 15523831294
Email: [email protected]
Address: Chanba Ecological District, Xi'an City, Shaanxi Province
Simo Motor Co., Ltd. is a professional motor supplier in Xi’an, China, specializing in high and low voltage motors, AC and DC motors, and customized industrial motor solutions for global customers.